Home » How to Choose Cabinet Pulls and Knobs

How to Choose Cabinet Pulls and Knobs

Knobs are loved for their beauty and functionality. Kitchens become untidy daily, so keeping that mess off your cabinet surface is crucial for longevity. Since you are prevented from transferring oils from your hands to the cabinet fronts by using knobs and pulls, they help protect the cabinet finish.

Your fingers won’t fit in the reveals to operate the doors and drawers on a frameless or full-overlay cabinet; therefore, you will require them.

They are available in various styles and finishes that can enhance the appearance of your kitchen. Therefore, how do you choose? Hardware should be the final thing you choose when remodeling or building kitchen cabinets in Oak Creek.

The best cabinet hardware for your kitchen can be obtained by following these recommendations after choosing all your other components.

Decide Whether you Want a Pull or a Knob

There are no hard and fast rules to follow when deciding whether to select a knob, a pull, or both.

One preference is to use drawer pulls and knobs on all the furniture’s doors. For any large doors, such as pantry doors, and pull-out doors, such as base or trash pull-out doors.

Using a pull to open a drawer is significantly more pleasant. Doing this lets you grab with your entire hand rather than just your fingers. With all your pots, pans, dishes, etc., drawers may become very heavy, which is very handy.

You can limit yourself to using only pulls or only knobs. A trend seen in many earlier kitchens before a wide selection of hardware was available is the usage of all knobs. All pulls are used in more conventional kitchens with a more classic pull style, giving a more current appearance.

You must consider how the pulls will be mounted before selecting to use all of them. Use vertical (modern) doors and horizontal (contemporary) for drawers. If you decide on the latter, look for a pull that is not too heavy because this tends to make a kitchen feel heavier.

Determine if you want Square or Curved

Note the lighting fixtures, countertop edge, cabinet type, and other significant design components. Are the lines straight or curved?

Select the hardware that matches the style of the lines in your design.

Shaker, flat panel, or any “modified” shaker door with a flatter and squared aspect are examples of square cabinet types. Hardware with square outlines can yet have a round shape. These have a more modern feel.

Traditional raised panel doors, pillow-top doors, recessed panel doors with ogee edges, or profiles with beads on the inside or outside are a few examples of curved cabinet types. Hardware with curved edges has softer edges and more detail. These are more conventional or evolving.

Think about the Finish

Additional finishes are available to add interest to your kitchen, although most homeowners will opt for chrome or brushed nickel. As long as the finish matches the other finishes in the design, you don’t have to match your faucet.

The following finishes complement brushed stainless or nickel faucets: rust, oil-rubbed bronze, antique pewter, bronze (from light to dark), satin brass (this one might be tricky), aluminum, black matte, and bronze.

Fewer finishes, like white, black, dark bronze, pewter, or clear glass, complement a chrome faucet.

Consider the Comfort

Before you buy the entire kitchen, test the knob or pull.

You can reach into the pull with your hand, touch it, and feel it. Does it feel pleasant? Or does it squeeze your fingers and have a sharp edge? Four people should fit comfortably.

Are sharp edges or ridges pressing against your fingertips as you grasp the knob or pull? When you use them a thousand times every day, it might get quite annoying.

Many businesses, including Top Knobs, provide sample programs to send you the knob or pull you want to try out in exchange for just the shipping cost. Test out the business. The additional research will be beneficial.

Analyze the Cost

Always remember that, in general, you get what you pay for.  A few businesses have low-cost brands; their finishes are subpar and appear cheap.

Instead of visiting big-box retailers, seek hardware in your neighborhood cabinet or plumbing showrooms, with a more incredible selection and staff available to help.

Knobs should be priced between $6 and $10, while pulls should be priced between $7 and $12 or more. The cost depends on the design and finish. However, solid bronze or stainless steel will cost significantly more. The longer pulls will cost more because more materials are required.

Also Read: Different essential features in a kitchen


Cabinet hardware is the kitchen’s crowning glory, so much like in a closet, it must match, be comfortable, and go with the overall look. Before making a purchase, do your research, order samples, and compare finishes to the materials in your kitchen to get the perfect fit. If you’re looking for a reputable store of kitchen cabinets in Oak Creek, consider Badger Cabinets for the best quality cabinets.

Mack Thomas

I am an experienced and passionate professional writer, with a special focus on blogging, product writing, and reading and writing. With years of experience in the field, I have been able to hone my craft to produce unique content that stands out from the rest. My goal is to create engaging material that engages readers and encourages them to think more deeply about the topics I write about.

Leave a Reply

Back to top