Home ยป When is Asphalt Milling Needed in Austin, Texas?

When is Asphalt Milling Needed in Austin, Texas?

Asphalt milling in Austin

Asphalt milling is a process that involves removing the top layer of an existing asphalt surface to prepare it for resurfacing or to address specific issues. In Austin, Texas, asphalt milling is typically needed in the following situations:

1. Pavement Rehabilitation:

Asphalt milling in Austin is commonly used as part of pavement rehabilitation projects. When the existing asphalt surface has deteriorated or developed cracks, potholes, or other structural issues, milling can remove the damaged layer and provide a smooth base for a new overlay.

2. Pavement Resurfacing:

Before resurfacing an asphalt pavement, milling is often required to ensure proper bonding between the new layer and the existing surface. Milling removes any irregularities, such as bumps or waves, and creates a uniform surface for the new asphalt overlay.

3. Adjusting Roadway Elevations:

In some cases, roadways in Austin may need to be adjusted due to changes in grades or to accommodate new infrastructure. Asphalt milling can be used to remove the necessary depth of the existing pavement to achieve the desired elevation and ensure proper drainage.

4. Correcting Drainage Issues:

If a road or parking lot in Austin is experiencing poor drainage, asphalt milling can be used to reshape the surface and improve water flow. Milling can create a cross slope or crown, allowing water to drain properly and prevent standing water, which can lead to pavement deterioration.

5. Surface Preparation for Other Projects:

In certain instances, asphalt milling is required as a preparatory step for other construction projects. For example, when installing new utilities or making repairs to underground infrastructure, milling may be necessary to expose the underlying layers and provide access for the work.

6. Pavement Recycling:

Asphalt milling is also commonly used in pavement recycling initiatives. Instead of completely removing the existing pavement, milling can be performed to reclaim the milled material, which is then recycled and used as aggregate in new asphalt mixtures.

It is important to note that the need for asphalt milling in Austin, Texas, will depend on the specific condition and requirements of each project. Consulting with a qualified asphalt paving contractor or engineer is recommended to assess the condition of the pavement and determine if milling is necessary.

For more information about Austin asphalt milling contractor, feel free to contact RDC Paving. We are a reputable, experienced company with an immaculate reputation and impeccable references. We offer asphalt milling, asphalt overlaying and paving, asphalt repairs, parking lot striping, asphalt driveway paving, sealcoating, ADA concrete, asphalt crack repairs, and parking lot maintenance. We also install concrete curbs, concrete sidewalks, concrete driveways, concrete parking lots, and concrete ramps. For a free quote, call +1 512-920-9155, or you can submit your request by filling out our online form.

 

Leave a Reply